Zanussi ZOD580 - Manual (Page 5)

When you connect the appliance to the electrical supply or
in case of a power cut, the Time function indicator flashes
automatically.
To set the current time use " + " or " - " button.
After approximately 5 seconds, the flashing stops and the
display shows the time of day set.
For time change you must not set an automatic
function (Duration or End
) at the same
time.
To use the appliance, push the control knob. The control
knob comes out.
Pre-heating
1. Set function and maximum temperature.
2. Let the appliance operate without the food for ap-
proximately 1 hour.
3. Set function and maximum temperature.
4. Let the appliance operate without the food for ap-
proximately 10 minutes.
5. Set function and maximum temperature.
6. Let the appliance operate without the food for ap-
proximately 10 minutes.
This is to burn off the residue in the appliance. The acces-
sories can become more hot than usually. When you pre-
heat the appliance for the first time, the appliance can
make an odour and smoke. This is the usual effect. Make
sure the airflow is sufficient.
Daily use
Warning! Refer to "Safety information" chapter.
Cooling fan
When the appliance operates, the cooling fan switches on
automatically. If you switch off the appliance, the cooling
fan continues to operate until the appliance cools down.
Activating and deactivating the top oven
1. Turn the knob for the top oven functions to an oven
function.
2. Turn the knob for the top oven temperature to a tem-
perature.
The power indicator comes on while the appliance
operates.
The temperature indicator comes on while the tem-
perature in the appliance increases.
3. To deactivate the appliance, turn the knob for the top
oven functions and the knob for the top oven tem-
perature to the Off position.
Activating and deactivating the main oven
1. Turn the knob for the main oven functions to an oven
function.
2. Turn the knob for the main oven temperature to a
temperature.
The power indicator comes on while the appliance
operates.
The temperature indicator comes on while the tem-
perature in the appliance increases.
3. To deactivate the appliance, turn the knob for the
main oven functions and the knob for the main oven
temperature to the Off position.
Top oven functions
Oven function Application
OFF position The appliance is OFF.
Light To light up the oven interior.
5