Yamaha YPT-230 - Manual (Page 26)

Using the Lesson Feature
PSR-E233/YPT-230 Owner’s Manual 26
This function lets you specify a section of a Song—“A” is the start point and “B” is the end point—for repeat
playback.
Play the Song and press the [A-B REPEAT] button at the beginning of the section
you want to repeat (the “A” point), then press the [A-B REPEAT] button a second
time at the end of the section you want to repeat (the “B” point). The specified A-B
section of the Song will now play repeatedly.
You can stop repeat playback at any time by pressing the [A-B REPEAT] button.
An “oFF REPEAT” message appears on the display. The A-B REPEAT mode will be
canceled and normal playback of the Song will continue.
The Song is made up by several tracks.
You can mute Track 1 or Track 2 during Song playback. You can turn the left- and right-hand parts on or off as
desired, allowing you to listen to the corresponding part (the part that is turned on), or practice the corresponding
part (the part that is turned off) on the keyboard.
• Track 1 can be muted by pressing the [R] button during Song playback.
• Track 2 or style track can be muted by pressing the [L] button during Song playback.
You can cancel the mute function by pressing the corresponding track buttons, [R] or [L] again during Song play-
back, or by selecting any other Song.
A-B Repeat
A B
Repeat playback of this section
• The repeat start and end
points can be specified in
one-measure increments.
• You can also set the A-B
Repeat function when the
Song is stopped. Simply use
the [REW] and [FF] buttons
to select the desired mea-
sures, pressing the [A-B
REPEAT] button for each
point, then start playback.
• If you want to set the start
point “A” at the very begin-
ning of the Song press the
[A-B REPEAT] button before
starting playback of the
Song.
NOTE
REPEAT A−b
• The A-B Repeat function will
be canceled when you
select another Song mode.
NOTE
Mute
Demo 1
001
010
Pressing one of the Track
buttons [R] or [L] will mute
the corresponding track
during Song playback.
Lit: Track contains data. Unlit: Track is muted or contains no data.