Yamaha SLG-100S - Manual (Page 14)

14
Specifications
Neck Mahogany
Body Maple
Fingerboard Rosewood
Bridge Rosewood
Frame Unit Maple
Strings Steel Strings for Acoustic Guitar
Sensors LR-Baggs
Connectors/Controls • AUX IN
• AUX IN Level Control
• LINE OUT jack (monaural)
• PHONES jack (stereo)
• Volume
• BASS control
• TREBLE control
• REVERB switch (OFF/1/2)
• PHONES switch (ON/OFF)
• LINE OUT Jack with POWER Switch (Inserting a plug into the
jack switches the power on)
Power Supply AC Adaptor/6LR61 battery x1 dual power source
* Recommended AC Adaptors: PA-D09, PA-1E, PA-3C
Battery Life Continuous Use
• Using Alkaline battery : approximately 24 hours
• Using Manganese battery : approximately 13.5 hours
With the reverb activated
• Using Alkaline battery : approximately 7.5 hours
• Using Manganese battery : approximately 2.0 – 0.5 hours (de-
pending upon the manufacturer)
String Length 634 mm (24-15/16”)
Dimensions (with the left frame attached and to the end of the strap pin)
970 (L) x 355 (W) x 80 (H) mm
38-3/16” (L) x 14” (W) x 3-1/8” (H)
Weight approximately 1.9 kg (4 lbs. 3 oz.)
* Design and specifications are subject to change without notice.
02_slg100s_en.pm65 06.8.22, 11:05 AM 14