Yamaha SLG-100S - Manual (Page 13)

13
■ AUX IN jack
• The AUX IN jack can be used to connect an external stereo signal source to the Silent Guitar.
Connecting the audio output of a CD player, cassette player, etc. to the instrument allows you to play
along with the external audio source.
• The AUX IN jack’s signal level can be controlled with the AUX IN level control.
■ Output Jacks (LINE OUT Jack/Headphone Jack)
• The LINE OUT jack can be connected to an external input jack on a device such as a guitar amplifier,
powered speaker, mixing console, etc., using a separately purchased standard stereo (monaural) phone
cable. This allows monitoring or recording of the Silent Guitar’s sound via an external device.
Connecting the LINE OUT jack to the INPUT jack on an electronic tuner, allows tuning of the instru-
ment in the same manner as other electronic instruments.
• When using the supplied stereo earphones, insert the earphone plug into the headphones jack (PHONES)
and turn the headphone ON/OFF switch to its “ON” position.
• The LINE OUT jack is a monaural type jack while the headphones jack is stereo.
• Before connecting the Silent Guitar to any external devices, make sure that the power of all
related devices is turned OFF. Set the volume level of any external audio sources to the mini-
mum level before connecting anything. High volume settings could cause damage to the equip-
ment and your hearing.
• Be careful not to step on the cord. The cord may break, equipment may be damaged, and this
may cause a substantial shock to your ears.
• The signal from the Silent Guitar’s output jacks must NEVER be returned to the AUX IN jack,
either directly or through external equipment. Doing so will result in feedback which may
cause damage to the internal electronics.
Connecting External Devices
02_slg100s_en.pm65 06.8.22, 11:05 AM 13