Yamaha 2 EZ-AG - Manual (Page 21)

Connecting To MIDI Devices
21 EZ-AG
The EZ-AG can be connected to a computer via MIDI.
● To connect the EZ-AG to a computer that is equipped with USB connec-
tors use a USB-MIDI interface such as the Yamaha UX16, as shown in
the diagram below.
● The EZ-AG can be directly connected to a computer that has built-in
MIDI connectors via standard MIDI cables, as shown in the diagram
below.
● To connect the EZ-AG to a Macintosh computer that has RS-422 ports
(the serial Printer and Modem ports) use a MIDI interface as shown in
the diagram below.
Connecting To a Computer
EZ-AG
MIDI IN
MIDI OUT
UX16
USB To the EZ-AG
MIDI IN connector.
To the EZ-AG
MIDI OUT connector.
USB-MIDI
Interface
Computer
• If you use the Yamaha UX16, be
sure to install the supplied driver
on your computer.
MIDI IN MIDI OUT
MIDI OUT MIDI IN
Computer EZ-AG
EZ-AG
MIDI IN MIDI OUT
MIDI OUT MIDI IN
Macintosh
MIDI Interface
Modem Port
• When using a separate MIDI
interface with a Macintosh com-
puter as in this example, be sure
to set the clock speed of the
interface from the computer
using the appropriate application
software. See your software
manual for details.
19