ZyXEL Communications ZyXEL Dimension ES-315-F - Manual (Page 12)

ES-315-F Quick Start Guide
11
"
Use only the power adaptor that came with the
ES-315-F.
2.3 Check the LEDs
Look at the LEDs (lights) on the front of the ES-315-F.
• The PWR/SYS LED turns green if the power is on.
• The LAN 1, 2, 3 or 4 and WAN LEDs turn on when the corre-
sponding ports are properly connected, and blink when there
is traffic.
V
If one of the LEDs does not behave as
expected, check the connection. Make sure the
device to which the corresponding port is
connected is turned on and working normally. If
this does not help, turn the ES-315-F off and on
again.
2.4 Set Up Your Computer’s IP Address
This section shows you how to set up your computer to
access the ES-315-F.