beautypg.com

Track programming for recording, Automatic tape programming, Stop the unit – Yamaha CDC-697 User Manual

Page 22: Select the disc

background image

18

En

You can select any of four tape lengths by pressing the
TAPE button.

You can also enter the total possible recording time of
the tape manually.
Example: For a C-64 tape (32 minutes on each side)

4

Press the REPEAT button.

The unit automatically programs tracks for side A and
side B separately considering the total time of the tape.

* The programmed track numbers and the total number

of tracks for side A and B are displayed for a short
time.

5

Start recording on the tape deck and press the
w

button at the same time.

6

The unit will pause at the end of side A of the
tape.
Turn the tape over to side B. Resume recording and, at
the same time, press the w or d button.

Notes

• It is recommended that you use a tape that is slightly longer

in length than the CD you are recording, because the
programmed tracks on a CD may not fit properly into the
time allowed on each half of the tape.

• CD synchronized recording function can be used if your tape

deck is compatible with it. In this case, in step 5 and 6, press
the

SYNCHRO button and then press the w button.

Recording automatically starts. (For details, refer to page 17.)

TAPE

TRACK PROGRAMMING FOR RECORDING

This convenient feature can be used to program tracks for
recording to tape. By only memorizing the total possible
recording time of the tape, the unit will automatically
program tracks or help you to program tracks so they will fit
onto the tape with the least amount of unrecorded space
remaining at each end of the tape.
The peak level searching function of this unit is useful for
adjusting recording level on the tape deck. (For details, refer
to page 22.)

Automatic Tape Programming

The unit will automatically program tracks on a disc with
the original order of tracks unchanged.

1

Stop the unit.

2

Select the disc.

3

Enter the total possible recording time of the
tape (tape length).

DISC SCAN

REPEAT

CDC8 WH26170

RANDOM

DISC SKIP

SYNCHRO DIMMER

STANDBY/ON

PEAK

PROG

CLEAR

TAPE

3

2

1

6

5

4

9

8

7

INDEX

+10

0

OUTPUT LEVEL

MODE

DISC SCAN

REPEAT

RANDOM

DISC SKIP

+

-

OPEN/

CLOSE

TEXT/

TIME

3

2

5

1

4

DISC SKIP

TAPE

4 6

6 4

REPEAT

(Off)

6

1

4

2

01_En_04_func_CDC-697_UAB.p65

7/12/06, 13:22

18