Yamaha CDC-697 - Manual (Page 21)

English
FUNCTIONS FOR
RECORDING
17
En
CD SYNCHRONIZED RECORDING
Using a compatible YAMAHA tape deck, you can
synchronize the tape deck to start recording automatically
when this unit starts playback. With this function, you can
record a CD on tape more easily and precisely. (For details,
refer to the operation manual of the tape deck to know
whether it is compatible or not.)
* This unit and the tape deck must be placed close to each
other so that both of them can receive the signals from the
remote control transmitter of this unit at the same time.
1 Select a disc.
2 Load a tape on the tape deck.
* The peak level searching function of this unit is
useful for adjusting recording level on the tape deck.
(For details, refer to page 22.)
3 Press the SYNCHRO button.
This unit enters into the pause mode, and the tape deck
enters into the REC/PAUSE mode.
* In this mode, the time display on this unit blinks.
4 If desired, select the track to be recorded first.
5 Press the w button.
Both CD playback and tape deck recording start.
* CD playback starts a little later than recording.
6 If you want to stop recording temporarily and
restart recording from a desired track, follow
steps 3 to 5 again.
■ To cancel this function
Press the a button.
Notes
• To finish or stop recording, press the a button on the tape
deck.
• Programmed sequence of tracks can also be recorded with
this function, instead of recording an entire disc. (For details,
refer to pages 13 to 14.)
• This function can also be used together with the tape-
programming function. (For details, refer to pages 18 to 21.)
DISC SCAN
REPEAT
CDC8 WH26170
RANDOM
DISC SKIP
SYNCHRO DIMMER
STANDBY/ON
PEAK
PROG CLEAR TAPE
3 2 1
6 5 4
9 8 7
INDEX +10 0
OUTPUT LEVEL MODE
DISC SCAN
REPEAT RANDOM
DISC SKIP
+ -
OPEN/
CLOSE
TEXT/
TIME
4
3
1
5
DISC SKIP
SYNCHRO
DISC SKIP
or
3 2 1
6 5 4
9 8 7
——10 0
01_En_04_func_CDC-697_UAB.p65 7/12/06, 13:22 17