Display, Display information at disc playback, Changing brightness of the display – Yamaha CDC-697 User Manual
Page 12: Selecting time displays and the text data
8
En
The display located in the center of this unit provides
information about discs.
After closing the disc tray by pressing the
OPEN/CLOSE
button or selecting any disc by using the
DISC SKIP
buttons when this unit is stopped, the display shows the total
number of tracks and the total recorded time of the selected
disc for a few seconds.
■ Display information at disc playback
1 Encloses the tray number of the selected disc.
2 The numbers corresponding to trays that contain discs
light up after discs are selected.
3 Shows the selected track number.
4 Shows the time displays. (For details, refer to “Selecting
time displays and the text data” on the right column.)
5 Displays the numbers that correspond to the numbers of
the tracks (as high as number 20) on the selected disc.
After each track is played back, its corresponding
number disappears so the number of remaining tracks
(and their numbers) can be seen at a glance.
6 Shows the level of signals output into an amplifier
adjusted by using the
OUTPUT LEVEL –/+ buttons.
■ Changing brightness of the display
If desired, you can change brightness of the display in three
degrees by pressing the
DIMMER button.
1 Elapsed time of the track now playing back
2
2 : 3 5
1 2 3 4 5
5DISCS
2 3 4 5
6 7 8 9 10
11 12
2
-
1 : 0 2
1 2 3 4 5
5DISCS
2 3 4 5
6 7 8 9 10
11 12
T O T A L
- 3 2 : 2 7
1 2 3 4 5
5DISCS
2 3 4 5
6 7 8 9 10
11 12
T O T A L
3 8 : 1 4
1 2 3 4 5
5DISCS
2 3 4 5
6 7 8 9 10
11 12
CONTROLS AND FUNCTIONS
Display
Notes
• The remaining time 2 will not be displayed if the track
number is 21 or higher.
• The disc title, artist names, or track names may not be
displayed with some CD TEXT discs. In this case,
“NO ENTRY” appears in the display.
when playing back a disc without CD TEXT
2 Remaining time of the track now playing back
3 Total disc playback time
4 Total remaining time on the disc
■ Selecting time displays and the text
data
You can select any of the four time displays by pressing the
TEXT/TIME display mode-select button. Since this unit is
CD TEXT compatible, the disc title, artist name, and track
name are also displayed in addition to the time displays
when playing back a CD with CD TEXT. Each time you
press the
TEXT/TIME display mode-select button, the
display changes as follows.
1 2
5 3 : 3 8
1 2 3 4 5
5DISCS
1 2 3 4 5
6 7 8 9 10
11 12
3
0 : 0 8
1 2 3 4 5
5DISCS
3 4 5
6 7 8 9 10
11 12
1
2
5
6
4
3
DIMMER
Disc title
Artist name
Track name
when playing back a CD TEXT disc
TEXT/
TIME
01_En_02_star_CDC-697_UAB.p65
7/12/06, 13:22
8