beautypg.com

15 english connecting to an external decoder, Impedance selector switch – Yamaha RX-V595aRDS User Manual

Page 15

background image

15

English

CONNECTING TO AN EXTERNAL DECODER

This unit is equipped with additional 6-channel audio signal
input terminals for inputting signals from an external decoder to
this unit.
Connect the 6-channel audio signal output terminals of the
decoder to the EXTERNAL DECODER INPUT terminals of this
unit.

Notes
• When signals input to these terminals are selected, the digital

sound field processor cannot be used.

• The settings of “CNTR”, “REAR”, “MAIN” and “BASS” in the

SET MENU mode have no effect on the signals input to these
terminals. The setting of “M.LVL” is effective. (Refer to
page 19 for details.)

• Adjustment of the output level of the center speakers, rear

speakers and subwoofer is effective when the signals input to
these terminals are selected as the input source. (Refer to
page 40 for details.)

External decoder with
6-channel discrete
outputs

(Europe model)

WARNING
Do not change the IMPEDANCE SELECTOR switch setting
while the power to this unit is on, otherwise this unit may be
damaged.

If this unit fails to turn on when the STANDBY/ON switch is
pressed, the IMPEDANCE SELECTOR switch may not be
fully set to either end. If so, set the switch to either end fully
when this unit is in the standby mode.

Select the position whose requirements your speaker system
meets.

(Upper position)

Main:

If you use one pair of main speakers, the impedance of
each speaker must be 4

or higher.

If you use two pairs of main speakers, the impedance
of each speaker must be 8

or higher.

Center: The impedance of the speaker must be 6

or higher.

Rear:

The impedance of each speaker must be 6

or

higher.

(Lower position)

Main:

If you use one pair of main speakers, the impedance of
each speaker must be 8

or higher.

If you use two pairs of main speakers, the impedance
of each speaker must be 16

or higher.

Center: The impedance of the speaker must be 8

or higher.

Rear:

The impedance of each speaker must be 8

or

higher.

IMPEDANCE SELECTOR SWITCH

IMPEDANCE SELECTOR

(Europe model)

01RX-V595aRDS-2

6/24/99, 10:59 AM

15