Yamaha RX-V595aRDS - Manual (Page 10)

10
1
Multi-information display
This displays various information, for example the station
frequency, preset station number and name of the selected
input source.
2
MEMORY indicator
When MEMORY is pressed, this indicator flashes for about five
seconds. During this period, the displayed station can be
stored in the memory.
3
AUTO TUNING indicator
This lights up when the unit is in the automatic tuning mode.
4
TAPE/MD MON indicator
This lights up when the tape deck (or MD recorder, etc.) is
selected as the input source by pressing TAPE/MD MON / EXT.
DECODER on the front panel or TAPE/MD on the remote control.
5
STEREO indicator
This lights up when an FM stereo broadcast with sufficient
signal strength is being received.
6
Signal-level indicator
This indicates the signal level of the station being received.
If multipath interference is detected, the indication decreases.
7
indicators
Either “dts” indicator lights up when the built-in DTS decoder is
turned on.
The red “dts” indicator lights up when playing a CD or LD
encoded with DTS.
The orange “dts” indicator lights up when playing a DVD
encoded with DTS.
* An orange “dts” indicator may light up when playing a CD or
LD encoded with DTS after playing a video-CD or DVD on a
DVD/LD combi-player.
DISPLAY PANEL
8
RDS mode indicators
The name(s) of the RDS mode(s) employed by the currently
received RDS station light(s) up. Illumination of one of the
named indicators shows that the corresponding RDS mode is
now selected.
9
, and indicators
“ ” lights up when the built-in Dolby Digital decoder is
on and the signals of the selected source encoded with Dolby
Digital are not in 2-channel. “
” lights up when the built-in
digital sound field processor is on, and “ ” lights up
when the built-in Dolby Pro Logic decoder is on. Depending on
the selected DSP program, both “ ” and “ ”, or
both “ ” and “ ” will light up.
0
PTY HOLD indicator
This lights up while a search is being performed in the PTY
SEEK mode.
q
EON indicator
This lights up when an RDS station that employs the EON data
service is being received.
w
Program type name indicators
The name selected in the EON mode lights up.
e
SLEEP indicator
This lights up while the built-in SLEEP timer is functioning.
01RX-V595aRDS-1 6/24/99, 10:59 AM 10