Zanussi ZBP 1165 - Manual (Page 24)

2 4
Replacing the Oven Light
If the oven bulb needs replacing, it must comply with the
following specifications:
- Electric power: 40 W,
- Electric rate: 230 V (50 Hz),
- Resistant to temperatures of 300°C,
- Connection type: E14.
These bulbs are available from your local Service Force
Centre.
To replace the faulty bulb:
1. Ensure the oven is disconnected from the electrical
supply.
2. Turn the glass cover anticlockwise.
3. Remove the faulty bulb and replace with the new one.
4. Refit the glass cover.
5. Reconnect to the electrical supply.
To programme the pyrolytic
cleaning cycle (delayed start,
automatic stop)
If you desire, you can programme the starting and end-
ing time of the pyrolytic cleaning cycle.
1. Touch control to switch on the oven.
2. Touch control as often as necessary, until the
“Pyro“ function symbol (PYRO 1-level 1) ap-
pears flashing in the display.
The indication
“REMOVE SHELF SUPPORTS” will
appear on the display.
Remove the shelf supports before activating
the pyrolytic cleaning cycle.
3. While symbol flashes, touch controls ' ' or ' '
to select the pyrolytic 1 (PYRO 1) or pyrolytic 2
(PYRO 2) function.
4. Once you have chosen the desired pyrolytic func-
tion, “the “Pyro” writing will flash in the display wait-
ing for confirmation to start the pyrolytic cleaning func-
tion.
At this time, touch the time function control
until The "End of Cooking" symbol and the
arrow symbol will flash (Fig. 29). The control
panel will display the end of the cleaning cycle (that
is, the actual time + cooking duration time).
5. Touch controls ' ' or ' ' to select the required end of
cycle time. Then, the “Pyro” writing starts flashing,
the oven lamp switches off and the pyrolytic cleaning
cycle will start at the set time.
6. After some time, the door lock will be activated and
the related symbol will be displayed.
At the end of the pyrolytic cleaning process, the display
shows the time of day. The oven door is locked.
Once the oven has cooled down, an acoustic signal will
be emitted and the door will unlock.
To stop the pyrolytic cleaning cycle at any time, touch
control .
Fig. 29