Yamaha EMX212S - Manual (Page 29)

Horizontal Orientation, Tilting and Rack Mounting
EMX512SC/EMX312SC/EMX212S 29
Tilting
You can set the EMX unit at an angle, as shown below. Do not push too forcefully when tilting the unit. Excess
force may cause the unit to topple or turn, potentially
resulting in equipment damage or in injury to bystand-
ers.
Rack Mounting
To prepare the unit for rack mounting, use the (separately sold) RK512 rack mount kit.
If rack-mounting the unit, be sure to maintain adequate ventilation so the unit does not overheat. Consider attaching a vent panel,
and do not use a sealed rack.
The EMX unit requires 7U of rack space.
■ How to install the rack-mount hardware
Turn the EMX unit upside down.
Using the kit’s 4 screws, attach the kit’s 2 metal fittings
as shown below.
Turn the EMX right-side up.
NOTE
Screws
Fittings
RK512 Rack mount Kit
1
2
3