Rear panel – Yamaha EMX212S User Manual

Page 26

Controls and Connectors

EMX512SC/EMX312SC/EMX212S

Rear Panel

SPEAKERS jacks

Use these jacks to connect to speakers. Note that the out-
put directed to these jacks varies according to the setting
of the POWER AMP switch R.

A1, B1:

Neutrik NL4 Speakon outputs. Polarities are
as shown below.

A2, B2:

Phone output jacks.

AC IN connector

Connects to the included power cord. Connect one end
of the cord to this connector, and then plug the other end
into a standard power outlet.

Please use the cord that comes with the mixer. Use of a
different cord may pose risk of fire, burns, or equip-
ment damage.

Ground Screw

For maximum safety be sure to securely connect the
EMX to an earth connection. The supplied power cable
has a three-prong plug that will ground the unit when the
plug is inserted into an appropriately grounded
three-prong type AC mains outlet. If the AC outlet is not
grounded, be sure to ground the unit by using this
ground screw. Correct grounding will effectively elimi-
nate hum noise and interference.

Neutrik Plug

A1 and B1 Connectors

1–

2–

–