Yamaha CNR-35 3 CNR-55 - Manual (Page 3)

IMPORTANT SAFETY INSTRUCTIONS
INFORMATION RELATING TO PERSONAL INJURY, ELECTRICAL SHOCK,
AND FIRE HAZARD POSSIBILITIES HAS BEEN INCLUDED IN THIS LIST.
WARNING- When using any electrical or electronic
product, basic precautions should always be followed.
These precautions include, but are not limited to, the fol-
lowing:
1.
Read all Safety Instructions, Installation Instruc-
tions, Special Message Section items, and any Assembly
Instructions found in this manual BEFORE making any
connections, including connection to the main supply.
2.
Main Power Supply Verification: Yamaha prod-
ucts are manufactured specifically for the supply voltage
in the area where they are to be sold. If you should move,
or if any doubt exists about the supply voltage in your
area, please contact your dealer for supply voltage verifi-
cation and (if applicable) instructions. The required supply
voltage is printed on the name plate. For name plate loca-
tion, please refer to the graphic found in the Special Mes-
sage Section of this manual.
3.
This product may be equipped with a polarized
plug (one blade wider than the other). If you are unable to
insert the plug into the outlet, turn the plug over and try
again. If the problem persists, contact an electrician to
have the obsolete outlet replaced. Do NOT defeat the
safety purpose of the plug.
4.
Some electronic products utilize external power
supplies or adapters. Do NOT connect this type of product
to any power supply or adapter other than one described in
the owners manual, on the name plate, or specifically
recommended by Yamaha.
5.
WARNING: Do not place this product or any
other objects on the power cord or place it in a position
where anyone could walk on, trip over, or roll anything
over power or connecting cords of any kind. The use of an
extension cord is not recommended! If you must use an
extension cord, the minimum wire size for a 25' cord (or
less) is 18 AWG. NOTE: The smaller the AWG number,
the larger the current handling capacity. For longer exten-
sion cords, consult a local electrician.
6.
Ventilation: Electronic products, unless specifi-
cally designed for enclosed installations, should be placed
in locations that do not interfere with proper ventilation. If
instructions for enclosed installations are not provided, it
must be assumed that unobstructed ventilation is required.
7.
Temperature considerations: Electronic products
should be installed in locations that do not significantly
contribute to their operating temperature. Placement of
this product close to heat sources such as; radiators, heat
registers and other devices that produce heat should be
avoided.
8.
This product was NOT designed for use in wet/
damp locations and should not be used near water or ex-
posed to rain. Examples of wet/damp locations are; near a
swimming pool, spa, tub, sink, or wet basement.
9.
This product should be used only with the compo-
nents supplied or; a cart, rack, or stand that is recom-
mended by the manufacturer. If a cart, rack, or stand is
used, please observe all safety markings and instructions
that accompany the accessory product.
10.
The power supply cord (plug) should be discon-
nected from the outlet when electronic products are to be
left unused for extended periods of time. Cords should
also be disconnected when there is a high probability of
lightening and/or electrical storm activity.
11.
Care should be taken that objects do not fall and
liquids are not spilled into the enclosure through any
openings that may exist.
12.
Electrical/electronic products should be serviced
by a qualified service person when:
a. The power supply cord has been damaged; or
b. Objects have fallen, been inserted, or liquids
have been spilled into the enclosure through
openings; or
c. The product has been exposed to rain: or
d. The product dose not operate, exhibits a
marked change in performance; or
e. The product has been dropped, or the enclosure
of the product has been damaged.
13.
Do not attempt to service this product beyond that
described in the user-maintenance instructions. All other
servicing should be referred to qualified service personnel.
14.
This product, either alone or in combination with
an amplifier and headphones or speaker/s, may be capable
of producing sound levels that could cause permanent
hearing loss. DO NOT operate for a long period of time at
a high volume level or at a level that is uncomfortable. If
you experience any hearing loss or ringing in the ears, you
should consult an audiologist.
IMPORTANT: The louder the sound, the shorter the time
period before damage occurs.
15.
Some Yamaha products may have benches and/or
accessory mounting fixtures that are either supplied as a
part of the product or as optional accessories. Some of
these items are designed to be dealer assembled or in-
stalled. Please make sure that benches are stable and any
optional fixtures (where applicable) are well secured BE-
FORE using. Benches supplied by Yamaha are designed
for seating only. No other uses are recommended.
92-469-2
PLEASE KEEP THIS MANUAL