Yamaha YSP-1000 - Manual (Page 64)

USING THE SLEEP TIMER
60
Use this feature to automatically set this unit to the standby mode after a specified time period. The sleep timer is useful
if you are going to sleep after a certain amount of time while this unit is still playing back a source.
1
Press SLEEP on the remote control
repeatedly to set the amount of time for the
sleep timer.
Choices: 120 min, 90 min, 60 min, 30 min, OFF
The SLEEP indicator in the front panel display
flashes while switching the amount of time for the
sleep timer.
Each time you press SLEEP on the remote control,
the front panel display changes as shown below.
2
Wait for a few seconds without operating this
unit to confirm the setting for the sleep timer.
The SLEEP indicator lights up in the front panel
display, indicating that the sleep timer is activated.
USING THE SLEEP TIMER
Setting the sleep timer
2 1
STEREO
SLEEP
CH LEVEL MENU
RETURN TEST
ENTER
SURROUND OFF SPORTS
3
4 5 6
7 8 9
0 +10
5BEAM ST+3BEAM 3BEAM
UNIVERSAL
MUSIC MOVIE VOL MODE
INPUTMODE
YSP
CINEMA DSP
SLEEP
SLEEP
Flashes
SLEEP
SLEEP 120min
SLEEP 90min
SLEEP 60min
SLEEP 30min
SLEEP OFF
SLEEP
Lights up