Yamaha YSP-1000 - Manual (Page 34)

AUTO SETUP
30
Example of using a tripod
Example of using the supplied cardboard
microphone stand
■ Assembling the supplied cardboard
microphone stand
You will find three separate parts (one circular-shaped part
and two longitudinal-shaped parts) of the cardboard
microphone stand originally put together.
1
Disassemble the three parts of the cardboard
microphone stand originally put together.
2
Insert one of the longitudinal-shaped part
into the crevice of the other longitudinal-
shaped part.
3
Place the circular-shaped part on top of the
two combined longitudinal-shaped parts.
4
Place the supplied optimizer microphone on
top of the circular-shaped part.
Optimizer microphone position
More than 2 m
Within 1 m
Within 1 m
Tripod
Imaginary
center line
Optimizer microphone position
Within 1 m
Within 1 m
Cardboard
microphone stand
More than 2 m
Imaginary
center line
1 2
3 4