Yamaha YSP-1000 - Manual (Page 47)

43
BEAM MODE
BA
S
IC
OP
ERA
T
IO
N
1
Press YSP on the remote control to switch to
the operation mode of this unit.
2
Press one of the beam mode buttons to
select the desired beam mode.
Outputs sound beams from the front left and right, center,
and surround left and right speakers. This mode is ideal
for enjoying surround sound effects to the fullest when
watching DVDs recorded in a multi-channel format or
playing back 2-channel sources in a multi-channel format.
Press 5BEAM on the remote control to select the
5 beam mode.
• To achieve the best surround sound effect, make sure that there
are no obstacles placed in the path of sound beams in that the
objects may prevent the beams from rebounding directly off the
walls in your listening room.
• The front left and right sound beams are output towards the
walls in your listening room.
Outputs sound beams from the front left and right, center,
and surround left and right speakers. This mode is ideal
for watching live recordings on a DVD. Vocals and
instrumental sounds can be heard close to the center of the
listening position while sound reflections from the venue
itself can be heard on your right and left, giving you the
feeling that you are sitting right in front of the stage.
Press ST+3BEAM on the remote control to select
the stereo plus 3 beam mode.
The front left and right sound beams are output directly to the
listening position.
2 1
STEREO
SLEEP
CH LEVEL MENU
RETURN TEST
ENTER
SURROUND OFF SPORTS
3
4 5 6
7 8 9
0 +10
5BEAM ST+3BEAM 3BEAM
TARGET
MUSIC MOVIE VOL MODE
INPUTMODE
YSP
CINEMA DSP
YSP
2 1
STEREO
3
4 5
5BEAM ST+3BEAM 3BEAM
TARGET
5 beam mode
Notes
Stereo plus 3 beam mode
Note
1
5BEAM
2
ST+3BEAM