Yamaha RX-V565 - Manual (Page 38)

34
En
Setting the option menu for each input source (OPTION menu)
■ Decoder Mode
Selects DTS digital audio signals for reproduction.
■ Extended Surround
Selects whether to reproduce multi-channel input signals
in 6.1- or 7.1-channel when surround back speakers are
used.
■ Signal Info
Displays information on audio and video signals on the
video monitor and front panel display. You can change
information to be displayed on the front panel display
using nCursor k / n.
■ Audio information
Notes
• “No Signal” is displayed when no signals are input and “---” is displayed
when signals that this unit cannot recognize are input.
• The bit rate may vary during playback.
■ Video information
HDMI error message
(appears only when an error has occurred)
■ FM Mode
Sets FM broadcasting receiving mode.
Input source: HDMI1-4, AV1-4
Choices:
Auto*/DTS
Auto Automatically selects audio input signals.
DTS Selects DTS signals only. Other input signals
are not reproduced.
Input source: HDMI1-4, AV1-4
Choices:
Auto*/PLIIxMovie/PLIIxMusic/EX/ES/
Off
Auto Automatically selects the most suitable
decoder according to whether a flag for
reproducing surround back channel is present,
and reproduces the signals in 6.1- or 7.1-
channel.
PLIIx
Movie Always reproduces signals in 6.1- or 7.1-
channel using the PLIIxMovie decoder
whether or not surround back channel signals
are contained. You can select this parameter
when one or two speakers are connected.
PLIIx
Music Always reproduces signals in 6.1- or 7.1-
channel using the PLIIxMusic decoder whether
or not surround back channel signals are
contained. You can select this parameter when
one or two speakers are connected.
EX/ES Automatically selects the most suitable
decoder for input signals whether or not the
flag for reproducing surround back channel is
present, and always reproduces signals in 6.1-
channel.
Off Always reproduces signals in 5.1-channel
whether or not the flag for reproducing
surround back channel is present.
Input source: HDMI1-4, AV1-4
Signal Info parameters
Information Description
Format Format of digital audio signals.
Channel The number of input signal channels (front/
surround/LFE).
For example, if input signal channels are 3
front channels, 2 surrounds and LFE, “3/2/
0.1” is displayed.
If a channel that cannot be expressed as the
above, a total number of channels such as
“5.1ch” may be displayed.
Sampling The sampling frequency per second in
analog-to-digital conversion.
Bitrate The bit rate of input signal per second.
Information Description
In Format and resolution of video input signal.
Out Format and resolution of video output signal.
Message Error messages about HDMI signals and
HDMI components. See the following for
details of the error messages.
HDCP Error HDCP authentication failed.
Device Over The number of HDMI components connected is
over the limit.
Out of Res. The connected monitor is not compatible with
the video input signal.
Input source: TUNER
Choices:
Stereo*/Mono
Stereo Receives in stereo mode.
Mono
Receives in monaural mode. You can get better
reception in MONO mode.