Quick start guide, Step 1: prepare items for setup, Step 2: set up your speakers – Yamaha RX-V565 User Manual

Page 12: Step 3: connect your components, Step 4: turn on the power, Step 5: select the input source and start playback

When you use this product for the first time, perform setup following the steps below. See the related pages for details on
operations and settings.

Prepare speakers, DVD player, cables, and other items
necessary for setup.
For example, prepare the following items for setting up a
5.1-channel sound system.

• Prepare two speakers (for front). The priority of the requirement of other

speakers is as follows:
1 Two surround speakers
2 One center speaker
3 One (or two) surround back speaker(s)

• If your video monitor is a CRT, we recommend that you use magnetically

shielded speakers.

Place your speakers in the room and connect them to this
unit.

• This unit has a YPAO (Yamaha Parametric Room Acoustic Optimizer)

that automatically optimizes this unit based on room acoustic
characteristics (audio characteristics of the speakers, speaker positions,
and room acoustics, etc.).
You can enjoy good balanced sound without special knowledge by using
the YPAO technology (see page 18).

Connect your TV, DVD player, or other components.

Connect the power cable and turn on this unit.

Select the component connected in the step 3 as an input
source and start playback.

• This unit supports the SCENE function that changes the input source and

sound field program at one time. Four scenes are preset for different
purposes for Blu-ray disc, DVD and CD, and you can select from a scene
from those just by pressing a remote control key. See page 21 for details.

Quick start guide

Step 1: Prepare items for setup

Requirements

qty.

Speakers

Front speaker

Center speaker

Surround speaker

Active subwoofer

Speaker cable

Subwoofer cable

Reproduction component such as DVD player