Yamaha RX-V565 - Manual (Page 24)

20
En
Optimizing the speaker setting for your listening room (YPAO)
Select “Retry” or “Exit” using nCursor l / h
and then press nENTER.
Retry
Performs “Auto Setup” again.
Exit
Terminates the measurement and “Auto Setup.”
y
• See page 51 for details on error messages.
• When “E-5:NOISY” appears, you can continue measurement. To
continue measurement, select “Proceed.” However, we recommend that
you solve the problem first and then perform measurement again.
If a problem occurs during measurement, “WARNING” is
displayed on the result display screen. Check the error and
solve the problems.
y
• See page 52 for details on warning messages.
• Optimization will not be performed while a warning message is
displayed. We recommend that you solve the problem and perform “Auto
Setup” again.
1
Check if “
→” is displayed on the left of
“WARNING” and press nENTER.
Details of the warning message are displayed. If there
are multiple warning messages, you can display the
next message using nCursor h.
2
To return to the top result display, press
nENTER again.
When an error message is displayed
during measurement
ERROR
Don't operate
. E-9:USER CANCEL
[ENTER]:Return
any function
>Retry Exit
[ ]/[ ]:Select p [
When a warning message is displayed
after measurement
WARNING
Reverse channel
W-1:OUT OF PHASE
[ENTER]:Return
FL ---
CENTER
SL
---
SBL ---