Walker MT - Manual (Page 92)

TM
WALKER MFG. CO.
• 5925 E. HARMONY ROAD, FORT COLLINS, CO 80528 • (970) 221-5614
FORM NO. 040107 PRINTED IN USA www.walkermowers.com © 2007 WALKER MFG. CO
Sound - Model MT
Sound Test
Sound test conducted was in accordance
with Council Directive 2000/14/EEC and
was performed on 28 February 06 under the
conditions listed:
General Condition: Clear
Temperature: 18 o (C), (65 F)
Wind Speed: < 2 m/s
Humidity: 20%
Barometric Pressure: 83.8 kPA
Lwa
100
LpA
85
OPERATOR
Sound - Model MTL
Vibration - Model MT
Sound Test
Sound test conducted was in accordance
with 79/113/EEC and was performed on 26
June 02 under the conditions listed:
Lwa
101
LpA
90
OPERATOR
General Condition: Clear
Temperature: 50 (F) o 10 (C) o
Wind Speed: < 5 mph (< 8 kmh)
Humidity: 52%
Barometric Pressure: 24.9" HG (759 mm Hg)
Vibration Level
Vibration levels at the operators handles
were measured in the vertical, lateral, and
longitudinal directions using calibrated vibra-
tion test equipment.
0.8g
Vibration - Model MTEFI
Vibration Level
Vibration levels at the operators handles
were measured in the vertical, lateral, and
longitudinal directions using calibrated vibra-
tion test equipment.
0.8g
Vibration - Model MTL
Vibration Level
Vibration levels at the operators handles
were measured in the vertical, lateral, and
longitudinal directions using calibrated vibra-
tion test equipment.
0.8g
Sound - Model MTEFI
Sound Test
Sound test conducted was in accordance
with Council Directive 2000/14/EEC and
was performed on 28 February 06 under the
conditions listed:
General Condition: Clear
Temperature: 18 o (C), (65 F)
Wind Speed: < 2 m/s
Humidity: 20%
Barometric Pressure: 83.8 kPA
Lwa
100
LpA
85
OPERATOR
Sound - Model MTLEFI
Sound Test
Sound test conducted was in accordance
with Council Directive 2000/14/EEC and
was performed on 28 February 06 under the
conditions listed:
General Condition: Clear
Temperature: 18 o (C), (65 F)
Wind Speed: < 2 m/s
Humidity: 20%
Barometric Pressure: 83.8 kPA
Lwa
100
LpA
85
OPERATOR
Vibration - Model MTLEFI
Vibration Level
Vibration levels at the operators handles
were measured in the vertical, lateral, and
longitudinal directions using calibrated vibra-
tion test equipment.
0.4g