Configuration, Single static ip – single ip address passthrough, 1 single static ip – single ip address passthrough – Westell Technologies Westell UltraLine 7400 User Manual
Page 48
030-300381 Rev. A
48
January 2004
UltraLine Home DSL Router (Models 7400, 7401)
User Guide
12. CONFIGURATION
12.1 Single Static IP – Single IP Address PassThrough
The following settings will be displayed if you select Single Static IP from the Configuration menu.
NOTE: The Single Static IP Configuration screen allows you to select the device on your LAN that will share your
Single Static IP.
STOP: Static NAT must be disabled before you can enable Single Static IP. To disable Static NAT, select Service
Configuration from the Configuration menu. Next, click on the static NAT button. Select the device from the
Static NAT Device drop-down menu and click on disable. Return to Single Static IP Configuration by selecting
Single Static IP Configuration from the Configuration menu.