Adding local trigger ports, Static nat, 4 adding local trigger ports – Westell Technologies Westell UltraLine 7400 User Manual
Page 103: 5 static nat
030-300381 Rev. A
103
January 2004
UltraLine Home DSL Router (Models 7400, 7401)
User Guide
13.4 Adding Local Trigger Ports
If you made changes in the Local ‘Trigger’ Port Range screen and clicked next, the following screen will be
displayed. Click on close to accept the changes, or click on add to go back to the Trigger Ports screen and enter
additional port range values. You can repeat this step for each port range that you want to add (up to 10 trigger
ports). When you are finished adding ports to the Local ‘Trigger” Port Range, you must click on close to accept the
information you have entered and to return to the Service Configuration screen.
13.5 Static NAT
Static NAT will allow you to configure your Router to work with the special NAT services.