Woods Equipment RD72 - Manual (Page 4)

4 Introduction
MAN0260 (Rev. 1/12/2007)
SPECIFICATIONS
MODEL RDC54 RD60 RD72
3-Point Hitch Limited Cat. 1 Cat. 1 Cat. 1
Cutting Width 54" 60" 72"
Cutting Height Range 1" - 4-1/2" 1" - 4-1/2" 1" - 4-1/2"
Operating Weight with
Chain Shielding
417 lbs. 521 lbs. 624 lbs.
Blade Speed (feet per minute) 16,200 18,000 18,100
Blade Spindles 3 3 3
Number of Blades 3 3 3
Universal Drive Series ASAE Cat. 3 ASAE Cat. 3 ASAE Cat. 3
Caster Wheels 3.5 x 4 x 10 3.5 x 4 x 10 3.5 x 4 x 10
Tractor PTO Speed RPM 540 540 540
Recommended Maximum
Tractor Horsepower
15-25 25-35 25-35
Mower Frame Thickness 10 GA 8 GA 8 GA
GENERAL INFORMATION
The purpose of this manual is to assist you in operating
and maintaining your mower. Read it carefully. It fur-
nishes information and instructions that will help you
achieve years of dependable performance. These
instructions have been compiled from extensive field
experience and engineering data. Some information
may be general in nature, due to unknown and varying
operating conditions. However, through experience
and these instructions, you should be able to develop
procedures suitable to your particular situation.
■ Some illustrations in this manual show the
mower with safety shields removed to provide a
better view. The mower should never be operated
with any safety shielding removed.
The illustrations and data used in this manual were cur-
rent at the time of printing. However, due to possible
inline production changes, your machine may vary
slightly in detail. We reserve the right to redesign and
change the machines as may be necessary without
notification.
Throughout this manual, references are made to right
and left directions. These are determined by standing
behind the tractor facing the direction of forward travel.
WARNING