Wells OC-2HG User Manual
Page 3
WARRANTY
xi
SPECIFICATIONS
1
FEATURES
&
OPERATING
CONTROLS
2
PRECAUTIONS & GENERAL INFORMATION
4
AGENCY
LISTING
INFORMATION
4
INSTALLATION
5
OPERATION
8
CLEANING
INSTRUCTIONS 12
PREVENTATIVE MAINTENANCE
Hinge
Adjustment
16
TROUBLESHOOTING
SUGGESTIONS
17
CUSTOMER
SERVICE
DATA
19
Thank You for purchasing this Wells Bloomfield appliance.
Proper installation, professional operation and consistent maintenance of this appliance will ensure that it
gives you the very best performance and a long, economical service life.
This manual contains the information needed to properly install this appliance, and to use and care for the
appliance in a manner which will ensure its optimum performance.
TABLE OF CONTENTS
SPECIFICATIONS
INTRODUCTION
DIMENSIONS
APPLIANCE
OVEN
CAVITY
Wide
30-1/8”
(765mm)
14-3/8”
(365mm)
36-1/8" (918mm) incl. 3" side spacers
(req'd. to maintain clearance to combustible walls)
Deep
25-1/4” (641mm) oven only
21” (533mm)
27-7/8” (682mm) incl. handle
High
25-1/8” (638mm) oven only
20” (508mm)
35-1/2" (895mm) incl. cook-top (no legs)
41-1/4” (1048mm) incl. cook-top and legs
Door Swing
20" (508mm )radius
ELECTRICAL VOLTS
kW
AMPS
L1 L2 L3
208 VAC 3ø 60Hz
15.2 45.9 39.4 41.4
240 VAC 3ø 60Hz
15.6 41.4 35.3 35.8
Note: Shipped from the factory 3 phase.
Unit is NOT approved for conversion to single phase
1
272
304
621
Op
M
OC-2HG
Combo Cook Center