Wyse Technology TM 9000 Series - Manual (Page 59)

47
Enable Write Filter command button then appears in the Write Filter Control dialog
box as shown in Figure 29).
Note
After flushing the cache and disabling the Write Filter, the Write Filter status
icon (in the desktop system tray) turns red and the Write Filter remains
disabled after the system restarts.
Figure 29 Write Filter Control dialog box (after disabling the Write Filter)
• You can enable the Write Filter by clicking the Enable Write Filter command button (A
message is displayed prompting for a system restart).
Note
After the system restarts to enable the Write Filter, the Write Filter status icon
(in the desktop system tray) turns green.
• To flush the cache and turn off the Write Filter for the current session only, click the
Flush Cache command button (this action will permanently save all writes in the
current session to the system storage media).
Note
After disabling the Write Filter for the current session, the Write Filter status
icon (in the desktop system tray) turns red and the Write Filter remains
disabled until the next system start.