Wayne-Dalton GSM-12 - Manual (Page 8)

You can reach us Toll Free 1-800-676-7734 for Consumer Assistance
or online at www.waynedalton.com
8
Erasing Individual Devices From The
GSM-12:
1. Press the MENU/NO button until the
display indicates the Erase Device operation.
ERASE DEVICE?
NO YES
a) Pressing the ON/YES button will display
information about an added device.
ID-XXX YYYYYYY
NO ERASE? YES
NOTE: X is the memory location of the
device.
NOTE: Y is the serial number of the device.
3. Use the UP and DOWN buttons to search
through the memory to find the device to
erase. When the device to be erased has
been found, press the ON/YES button. A
confirmation message will be displayed
before permanently erasing the device.
ID-XXX ERASED
NO UNDO? YES
a) To permanently erase the device, press
the MENU/NO button.
b) To restore or undo the erase operation,
press the ON/YES button.
c) An UP arrow in the top left display
indicates more devices to view.
d) A DOWN arrow in the top left display
indicates there is a previous device to view.
Erasing Individual
Devices From The GSM-12
ERASE DEVICE?
NO YES
ID-XXX YYYYYYY
NO ERASE? YES
ID-XXX ERASE
NO UNDO? YES
GSM-12
MENU/NO ON/YES