Wayne-Dalton GSM-12 - Manual (Page 11)

You can reach us Toll Free 1-800-676-7734 for Consumer Assistance
or online at www.waynedalton.com
11
1. Connect the Data Cable from the GSM-12
to the Remote Radio Receiver.
2. Press the MENU/NO button until the
display indicates the Get From Receiver
operation.
GET FRM RECEIVER
NO YES
3. Pressing the ON/YES button will display
transfer operation activity.
RECEIVING......
a) When transfer operation is complete, the
GSM-12 will display.
RECEIVING DONE
b) If the communication cable is not
connected or the connection is not correct,
the GSM-12 will display.
CHECKING COMM....
c) Then after two seconds the GSM-12 will
display.
COMM ERROR
Transfering Radio Remote
Receiver Devices to
Controller
Operation
GET FRM RECEIVER
NO YES
RECEIVING......
RECEIVING DONE
CHECKING COMM....
COMM ERROR
GSM-12
MENU/NO ON/YES