Wayne-Dalton GSM-12 - Manual (Page 10)

You can reach us Toll Free 1-800-676-7734 for Consumer Assistance
or online at www.waynedalton.com
10
1. Connect the communication cable from the
GSM-12 to the Remote Radio Receiver.
2. Press the MENU/NO button until the
display indicates the Send To Receiver
operation.
SEND TO RECEIVER
NO YES
3. Pressing the ON/YES button will display
transfer operation activity.
SENDING......
a) When transfer operation is complete, the
GSM-12 will display.
SENDING DONE
b) If the communication cable is not
connected or the connection is not correct,
the GSM-12 will display.
CHECKING COMM.....
c) Then after two seconds the GSM-12 will
display.
COMM ERROR
Transfering Controller
Devices to Radio Remote
Receiver SEND TO RECEIVER
NO YES
SENDING......
SENDING DONE
CHECKING COMM....
COMM ERROR
GSM-12
MENU/NO ON/YES