Wayne-Dalton GSM-12 - Manual (Page 7)

You can reach us Toll Free 1-800-676-7734 for Consumer Assistance
or online at www.waynedalton.com
7
3. Press and hold the transmitter button you
would like to program (learn) to the GSM-12.
4. Once the GSM-12 has received the
transmission, two possible messages will be
displayed.
a) Message 1 will be displayed if this is a
new device.
NEW LEARN ID-XXX
b) Message 2 will be displayed if this device
had been previously added.
DUPLICATE ID-XXX
5. If a transmission is not received within 30
seconds, the GSM-12 will display a time-out
message.
LEARN TIME-OUT
6. To cancel the “Listen Mode” press MENU/
NO. The display will indicate this action.
LEARN CANCELLED
Operation
GSM-12
MENU/NO ON/YES
NEW LEARN ID-XXX
DUPLICATE ID-XXX
LEARN TIME-OUT
LEARN CANCELLED
Programing (Learning)
Devices to the GSM-12
(Continued)