Windsor Wave WAV 10125050 - Manual (Page 12)

MAINTENANCE
WAV 86038510 05/15/07 4-2
DAILY MAINTENANCE
1. Shake down bag daily.
2. Check power cord for damaged or frayed
insulation.
3. Return brush adjustment lever to “STORE”
position when the machine is not in use.
4. Check for and remove any lint or debris
around brush and brush housing.
REGULAR/PERIODIC MAINTENANCE
1. Every 4 to 6 months remove wheels, clean axles,
and apply a thin coat of silicone lubricant to axles.
2. The filter bag can be washed twice before losing
the filtering capability. This should be done using
a mild detergent in cool water and hung up to
drip-dry.
3. Inspect and clean vac motor filters.
4. Periodically inspect all hoses, electrical cables, filters,
gaskets and connections on your machine. Frayed or
cracked hoses should be repaired or replaced to
eliminate vacuum loss.
5. The electrical cable must be well insulated, if the
cable insulation is broken or frayed, repair or
replace it immediately. Don’t take chances with
electrical fire or shock.