Canon IXUS 55 - Manual (Page 126)

124
*Default setting Setting available U Setting can only be selected for the first image.
(Shaded Area):Setting is retained even when the camera power is shut off.
With the exception of the [Time Zone], [Date/Time], [Language] and [Video System]
settings, all the other menu settings and changes made with the camera buttons can
be reset to the default values in a single operation (p. 31) .
(1)(2) The resolutions and frame rates for the (Movie) mode are as follows.
(3) The default flash setting is Auto with Red-Eye Reduction in the
modes, Auto in the modes, and Off in the modes.
- The flash cannot be set in mode.
- When the flash fires in mode, the camera will automatically use Slow Synchro
mode.
(4) The flash is set by default not to fire in the and modes.
(5) You cannot switch between the Macro/Infinity modes when the camera is in the
modes.
(6) AF cannot be selected in the modes.
(7) The AF-assist Beam cannot be set in mode.
(8) Can even be set during shooting (Standard only).
(9) Exposure compensation not available in
or modes.
(10) Automatically set by the camera.
(11) The Photo Effect cannot be set in the
mode.
Digital Zoom
On – – (8)
p.36
Off * * – * *
Metering
Method
Evaluative – (10) * * * – (10) – – (10)
p.49 Center-Weighted Average – – – –
Spot – – – –
Exposure Compensation – (9) U – p.50
Exposure Shift – – – – – – p.43
Long Shutter – – – – – – p.51
White Balance – – (10) U p.53
Photo Effect – – – (10) U (11) p.56
ISO Speed – (10) – (10) – (10) – (10) – (10) p.63
Auto Rotate U – p.64
Grid Lines – p.28
Resolution Frame Rate
* – – *
– – – –
– – – –
Function Page