Hyundai H-CMMD4042 User Manual
Page 52
52
4. Press the
buttons on the panel or
/
buttons on the RC or touch the desired button on the screen
to select the desired value.
5. Press PLAY/PAUSE / ENTER / SCAN button to confirm.
TV shape: select the width/height of the image: 16:9 (wide screen), 4:3 (normal view).
This function is not available for some discs.
Angle mark: set the angle indicator mode (when the DVD has multi-angle content): On (view indicator), Off
(don’t view indicator).
Press the ANGLE button on the RC to change the angle.
View mode: select the viewing mode: Fill (fill the screen with the picture), Original (original mode), H fit (fit
horizontally), W fit (weight fit), Fit to scrn (fit to screen), Pann & scan (Pan and scan mode).
Audio
1. Enter the AUDIO menu.
2. Use the
buttons on the panel or
/
buttons on the RC or touch
the desired item on the screen to select the settings: Pink noise, DRC,
Center delay, Rear delay, Down sampling.
3. Press the
buttons on the panel or
/
buttons on the RC or
touch the desired button on the screen to enter the list of values.
4. Press the
buttons on the panel or
/
buttons on the RC or
touch the desired button on the screen to select the desired value.
5. Press PLAY/PAUSE / ENTER / SCAN button to confirm.
Pink noise: use the built in pink noise to adjust each channel output volume or verify if audio output quality is
normal by adjusting the output volume during listening. Select among: Off (don’t use pink noise), Left (left
channel pink noise), Center (center channel pink noise), Right (right channel pink noise), Left surr (left
surround channel pink noise), Subwoofer (subwoofer pink noise).