WhisperKool 5000 - Manual (Page 29)

Page 27
Drain Line
All units come with a drain line for additional
removal of excessive condensate. It is mandatory
to install the drain line with “T” fitting. During
operation, the cooling unit will strip excess water
from the air in order to maintain the proper level
of humidity within the cellar. However in extreme
humidity, additional condensate will be removed.
Thus the drain line will prevent overflow and leak-
ing by allowing for discharge of the additional
condensate.
Failure to install the drain line voids the
warranty.
To prevent mold from growing, allow the
drain line to hang above the water line.
Condensation Drain Line Tube
The condensation drain line tube is used to remove excess condensation from the unit to a proper discharge location.
It is important that the drain line tube is properly connected and used to prevent leakage and other problems associ-
ated with excess condensation.
Failure to use the condensation drain line tube will void the warranty on the unit.
Drain Line
T-Fitting
WRONG: Drain line is under water.
DRAIN LINE