WiLife V2.5 - Manual (Page 100)

User Guide
86
7) Specify camera event properties for each camera by clicking on a camera line or clicking on the Edit
button.
8) Click the OK button to save the properties for the event. You will notice the new event displays in the
color black.
Create An Event To Turn Off Recording
Disable recording at set times and on specific days, even if there is no motion on the camera.
To create an event that turns off recording, follow these instructions:
1) Click the Alerts Scheduler Front Control Panel > View Schedule. The Recording and Alerts Schedule
Screen displays.
Note: The Recording and Alert Schedule Screen is also accessible through Setup > Recording tab >
SCHEDULE RECORDING TIME.
2) On the Scheduler calendar, click and drag from the desired start time to a stop time, where you
release the mouse button. The Schedule Event Properties Screen displays.
Note: You can also open this screen by right-clicking on a desired time block and select the option
"New Recording Event Off."
3) In the Name field, enter the desired name for the event.
4) Enter the Start and End times for the event.
5) Specify the days of the week you want the event to run on.
6) Select "Turn Recording and Alerts Off."
7) Click the OK button to save the properties for the event. You will notice the new event displays in the
color black.
Modifying a Recording or Alert Event
From time to time, you may need to modify a recording or alert event. Changing the properties of an event are
very similar to creating one.
1) Click the Alerts Scheduler Front Control Panel > View Schedule. The Recording and Alerts Schedule
Screen displays.
Note: The Recording and Alert Schedule Screen is also accessible through Setup > Recording tab >
SCHEDULE RECORDING TIME.
2) Double-click on the event you wish to modify. The Schedule Event Properties Screen opens.
Note: You can also right-click on the desired event and select the option "Edit Event."