Wasp Bar Code Wasp WPL606 - Manual (Page 5)

1. Product Introduction
Thank you for purchasing the W606 bar code printer. This guide will describe all
of the common operations needed to operate and maintain your W606.
1.1 Specification
1.1.1 Printer
Item Specification
Printing Mode Thermal transfer and direct thermal
Resolution 203DPI
Max. Print Length 1000 mm ( 39.4” )
Max. Print Width 104 mm ( 4” )
Print Speed 3,4,5,6 ips
1.1.2 Environment
Operating Environment
Temperature 5 - 40 O C ( 41 O F - 104 O F )
Humidity 30 % - 85 %
Storage Environment
Temperature -10 - 60 O C ( 14 O F - 140 O F )
Humidity 20 - 95 %
Ventilation Free air environment
1.1.3 Hardware
Sensors
Label gap sensor, Paper end sensor, Ribbon end
sensor, Ribbon near end sensor, Black mark sensor,
Head open sensor, Case open sensor, Label taken
sensor, Paper near end sensor.
Memory
Flash ROM (2MB), DRAM (2MB) and 8M optional
flash ROM (memory module)
Interface
RS-232C, Centronics (SPP), USBV1.1, Internal LAN
adapter (optional).
Power 100 - 240 V universal switching power supply.
1