Wasp Bar Code Wasp WPL606 - Manual (Page 21)

5. Printer Maintenance
The printer should be cleaned regularly to maintain high quality printing.
5.1 Cleaning the Print Head
1. Switch off and unplug the printer
2. Open the printer cover
3. Open the print head lift lever
4. Remove the ribbon. (If loaded)
5. Rub the Wasp Thermal Printer Cleaning Pen Part# 633808441012 tip across
the print head several times
6. Do not close the print head until the alcohol evaporates
7. Reload the ribbon, close the print head lift lever and close the printer cover
5.2 Cleaning the Outside of the Printer
1. Switch off and unplug the printer
2. Wipe the printer lightly using a lint-free cloth soaked in water or mild
detergent.
NOTE: Do not use harsh or abrasive cloth and solvent.
5.3 Cleaning the Internal Parts of the Printer
1. Switch off and unplug the printer
2. Open the printer right side cover
3. Remove the media and ribbon (If loaded)
4. Open the printer print head lift lever
5. Using a soft dry cloth, wipe the internal parts. Compressed air can also be
used to remove dust
6. The rubber roller can be cleaned with a damp cloth. Dry the roller after
cleaning
7. Install the ribbon and label, close the print head lift lever
8. Close the printer right side cover
17