Installation requirements, Tools and parts, Location requirements – Whirlpool 1187361 User Manual
Page 3
3
INSTALLATION REQUIREMENTS
Tools and Parts
Check that you have everything necessary for correct installation.
Proper installation is your responsibility.
Tools needed
Parts supplied
Check that all parts are included in parts package.
Air conditioner installation
SMART-MOUNT
™
tray assembly installation
Location Requirements
IMPORTANT: Observe all governing codes and ordinances.
Check the location where the air conditioner will be installed.
Proper installation is your responsibility. Make sure you have
everything necessary for correct installation.
The location should provide:
■
Grounded electrical outlet within 4 ft (122 cm) of where
the power cord exits the air conditioner.
NOTE: Do not use an extension cord.
■
Free movement of air to rooms to be cooled.
■
A large enough opening for the air conditioner. Installation
parts are supplied for double-hung windows.
■
Adequate wall support for weight of air conditioner. Air
conditioner weighs 80 lbs (36.3 kg) to 125 lbs (56.7 kg).
IMPORTANT SAFETY INSTRUCTIONS
WARNING:
To reduce the risk of fire, electrical shock or injury when using your air conditioner, follow these basic precautions:
SAVE THESE INSTRUCTIONS
Unplug air conditioner before servicing.
Use two or more people to move and install air conditioner.
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
■
Safety glasses
■
Flat-blade and Phillips
screwdrivers
■
¹⁄₄ in. nut driver
■
⁷⁄₁₆ in. wrench
■
Scissors
■
Tape measure
■
Level
■
Drill
■
³⁄₃₂ in. or smaller drill bit
1. 1 window-lock bracket
2. 6 - #8 x
³⁄₈ in. pan-head screws
3. 3 - #8 x
³⁄₄ in. round-head screws
4. 3 - #10 x
³⁄₈ in. pan-head screws
5. 2 side curtains
6. 1 top channel
7. 1 foam seal
8. 2 side curtain frames
1
5
4
3
2
6
7
8
1. 1 tray back
2. 1 tray center
3. 2 tray sides
4. 2 support legs
5. 4 - #8 - 18 x
¹⁄₄ in. hex-
head screws
6. 4 flat washers
7. 4 lock washers
8. 4 hex nuts
9. 4 carriage bolts
10. 2 - #10 - 12 x 1
¹⁄₂ in.
slot-head wood screws
1
2
3
4
5
6
7
8
9
10