Windsor ISCRUB CSE24 10060250 - Manual (Page 60)

MACHINE TROUBLESHOOTING-
CONTROLLER FAULT CODES
86037660 CHARIOT 05/27/08 4-33
LED
CODE PROGRAMMER LCD
DISPLAY EXPLANATION POSSIBLE CAUSE
3,1
PROC/WIRING FAULT
HPD fault present for
>10 sec.
1. Misadjusted throttle.
2. Broken throttle pot or throttle
mechanism.
3,2
BRAKE ON FAULT
brake On fault
1. Electromagnetic brake driver
shorted.
2. Electromagnetic brake coil
open.
3,3
PRECHARGE FAULT
precharge fault
1. Low battery voltage.
2. KSI and throttle turned on at
same time.
3,4
BRAKE OFF FAULT
brake Off fault
1. Electromagnetic brake driver
open.
2. Electromagnetic brake coil
shorted.
3,5
HPD
HPD (High Pedal
Disable) fault
1. Improper sequence of throttle
and KSI,
push, or inhibit inputs.
2. Misadjusted throttle pot.
4,1
CURRENT SENSE FAULT
current sense fault
1. Short in motor or in motor
wiring.
2. Controller failure. *
4,2
HW FAILSAFE
motor voltage fault
(hardware
1. Motor voltage does not
correspond to throttle request.
2. Short in motor or in motor
wiring.
3. Controller failure. *
4,3
EEPROM FAULT
EEPROM fault
1. EEPROM failure or fault.
4,4
POWER SECTION FAULT
power section fault
1. EEPROM failure or fault.
2. Short in motor or in motor
wiring.
3. Controller failure.