White Rodgers 1F95W-71 - Manual (Page 32)

32
programming instructions to correct the er-
ror (you can change any part of your pro-
gram while you are reviewing it).
6. Press RUN
PRGM
.
7. Press SYSTEM
HEAT - OFF - COOL - AUTO
until COOL is displayed.
8. Repeat steps 2 through 5 to check cooling
temperatures.
9. Press RUN
PRGM
to begin program operation.
YOUR THERMOSTAT IS NOW COMPLETELY
PROGRAMMED AND READY TO AUTOMATI-
CALLY PROVIDE MAXIMUM COMFORT AND
EFFICIENCY!
Press SYSTEM
HEAT - OFF - COOL - AUTO
until OFF is displayed. Reattach
thermostat to subbase. Then press SYSTEM
HEAT - OFF - COOL - AUTO
to
select the operation mode you want (HEAT,
COOL, AUTO).
When you have completed programming, you
may set option switches #3 or #4. (see TOTAL
KEYPAD LOCKOUT and PARTIAL KEYPAD
LOCKOUT in the OPERATING FEATURES
section).
NOTE