White Rodgers 1F95W-71 - Manual (Page 29)

29
Program Cooling Temperatures
If outside temperature is below 50
°
F, we
recommend that you remove the thermo-
stat from the wall before proceeding with
the following steps to program cooling
temperatures. Personal injury or prop-
erty damage may occur due to air condi-
tioner compressor slugging. A fresh 9
volt Energizer
® alkaline battery must be
installed to perform off-wall program-
ming. Programming away from the wall
should prevent accidental compressor
operation. USE SYSTEM
HEAT - OFF - COOL - AUTO
TO TURN SYS-
TEM OFF BEFORE REATTACHING
THERMOSTAT TO SUBBASE!
1. To program cooling temperatures for the
heating/cooling periods you have already
set, press SYSTEM
HEAT - OFF - COOL - AUTO
until COOL is displayed.
2. Press VIEW
PRGM
once. The Monday heating/
cooling period 1 start time you just pro-
grammed will appear, and the currently pro-
grammed cooling temperature (A or B) will
be displayed.
3. Press or to display the COOL A
or COOL B temperature you want for
Monday’s heating/cooling period 1.
4. Press VIEW
PRGM
, then select Monday’s COOL A
or COOL B temperature for period 2.
5. Repeat steps 3 and 4 for Monday’s heating/
cooling periods 3 and 4.
CAUTION !