White Rodgers 1F95W-71 - Manual (Page 27)

27
display will alternate between the HEAT A
and HEAT B temperatures you previously
selected).
5. If you want the fan to run continuously
during Monday heating/cooling period 1,
press FAN
ON - AUTO
until PRG FAN is displayed.
6. After selecting the desired heating tempera-
ture for heating/cooling Monday’s period 1,
press VIEW
PRGM
. The currently programmed start
time and heating temperature for Monday’s
heating/cooling period 2 will be displayed.
7. Repeat steps 3 through 5 to select the start
time and heating temperature for Monday’s
heating/cooling period 2.
8. Repeat steps 3 through 7 for Monday’s
heating/cooling periods 3 and 4.
This display window shows that for Monday’s
heating/cooling period 1, the start time is
5:00 AM, and 64
°
is the programmed tem-
perature (this example reflects factory pre-
programming, where 64
°
is the HEAT A
temperature).
3. To change the displayed start time to your
selected start time for Monday’s period 1,
press TIME
FWD or TIME
BACK
until your selected time
is displayed. The time will change in 15
minute increments. The time you program
will be the start time of Monday’s period
1 for both heating and cooling.
4. If the temperature displayed is not the HEAT
A or HEAT B temperature you want for
Monday’s period 1, press
or (if
you continue to press or , the