White Rodgers 1F95W-71 User Manual
Page 25
25
5.
Press
SET
CLOCK
once. The display will show the
day of the week as an abbreviation (MO for
Monday, TU for Tuesday, etc.).
6.
Press and hold either
TIME
FWD
or
TIME
BACK
until you
reach the current day of the week.
7.
Press
RUN
PRGM
once. The display will show the
correct time and room temperature alter-
nately.
Program Heating and Cooling
Temperatures
During programming, if you don’t press any
buttons for 5 minutes, the thermostat will enter
the HOLD mode and will maintain a constant
temperature. The display will revert to the alter-
nating time/temperature display. To resume pro-
gramming after this happens, press
VIEW
PRGM
until
you are at the point where you stopped program-
ming. Then you may continue to enter your
programs normally. If you want to stop program-
ming at any time, simply press
RUN
PRGM
to resume
program operation.
1.
Press
SYSTEM
HEAT - OFF - COOL - AUTO
until HEAT is displayed.
2.
Press
VIEW
TEMP
once. The display will continue
to show HEAT. Below HEAT is the letter A,
representing the first programmed heating
temperature (HEAT A). At the right of the
display is the currently programmed HEAT
A setting.
3.
Press either
or
to change the
temperature to your selected HEAT A
setting.