Westinghouse W31501 - Manual (Page 16)

Getting to Know Your LCD Display
11
EN
GLISH
2.10 Turning On the LCD Display
1 Press the Power key on the LCD
display control panel or remote
control to turn the LCD display on.
The power LED on the front panel
glows green.
2 Press either Power key again to
turn the LCD display off. The
power LED on the front panel
glows orange.
2.11 Power Management System
Your LCD display complies with the VESA DPMS power management pro-
posal. The VESA DPMS proposal provides four phases of power saving
modes by detecting the horizontal or vertical sync signal. When the LCD
display is in power saving mode or detects an incorrect timing, the monitor
screen becomes blank and the power LED indicator blinks green.
2.12 Status LEDs
The following table describes the LCD display status LEDs.
DC 12V
Mode LED Meaning
PC Blinking Green Power saving mode
Blinking Green Over-range detected
(the input signal is out
of the range of the mon-
itor).
Steady Green Normal Operation
TV Steady Green Normal Operation
AV/SV/YPbPr Green LED Signal is present
Orange LED No Signal is present
Power Off LED off
nextgen-nt1503.book Page 11 Thursday, December 25, 2003 4:42 PM