Westinghouse W31501 - Manual (Page 14)

Getting to Know Your LCD Display
9
EN
GLISH
2.6 Adjusting the Viewing Angle
When used on a desktop or other flat surface, you can
tilt the LCD display back to achieve a more comfort-
able viewing angle. You can adjust the LCD display
viewing angle from an upright position to a back-tilted
angle of up to 7 degrees and a forward-tilted angle of 3
degrees.
Caution:
Forcing the LCD display past its maximum
extension point will damage the unit.
When tilting the screen, hold the base firmly
and adjust the viewing angle by moving the top
of the display forward or backward. Do not
press the LCD panel when tilting the display.
2.7 Setting Up the Optional Wall Mount
Purchase a standard wall mount kit (75mm x 75mm screw mount area, mini-
mum 15 kg load-carrying weight) from a third-party vendor if you want to
attach the LCD display to a wall or other fixed surface.
1 Prepare a flat, stable working area with a soft cloth or foam pad to
place the LCD display on.
2 Turn the LCD display
power off, disconnect it
from the power adapter,
and gently lay the display
on its front.
3 Remove the four screws
located at the rear of the LCD display as illustrated. Remove the LCD
display stand.
4 Follow the instructions included with the wall mount kit that you pur-
chased.
Ɯ 7Ɯ
nextgen-nt1503.book Page 9 Thursday, December 25, 2003 4:42 PM