Viking VESO J690.150 - Manual (Page 9)

P
ro
d
u
ct
C
o
n
tr
o
ls
13
P
ro
d
u
ct
C
o
n
tr
o
ls
12
Control Panel Settings
Water Hardness
The oven features a system that automatically indicates when it
is time to descale. The system can be optimized for households
with very soft water and very hard water, by changing the user
settings to the relevant range of water hardness. There are
three settings for water hardness. The factory setting is set for
hard water types.
To select water hardness:
1. Press and turn knob until appears in the
text display. Press knob to confirm.
2. Turn knob until appears in the text
display. Press knob to confirm
3. Turn knob until , , or is displayed.
Press knob to confirm the desired setting.
4. Press “Off” to exit.
Control Panel Settings
Setting Alarm Volume
The alarm can be set to low or high volume.
1. Press and turn knob until appears in the
text display. Press knob to confirm.
2. Turn knob until appears in the text display. Press
knob to confirm.
3. Turn knob until or is
displayed. Press knob to confirm desired setting.
4. Press “Off” to exit.
Interior Oven Light
Press the “Light” button to turn the interior light on or off at
any time. If the interior light is not turned off by pressing the
button, it will automatically turn off 30 minutes after
use. You can also select between “Automatic with door” or
(press “Light”). With the automatic
setting, the interior light automatically comes on when the
oven door is opened and turns off again when it is closed.
Setting Interior Oven Light
1. Press and turn knob until appears in the
text display. Press knob to confirm.
2. Turn knob until appears in the text display. Press
knob to confirm.
3. Turn knob until or
key> is displayed. Press knob to confirm the desired
setting.
4. Press “Off” to exit.
User Settings
Alarm
Light Temp
Oven
Temp Meat
Probe Timer Clock Stop
Time
Mode Timer Setting Off
0 0:0 0 0 0 0 ° Cook
Time
S e l e c t a n d p r e s s S e l e c t a n d p r e s s S e l e c t a n d p r e s s
U s e r S e t t i n g s U s e r S e t t i n g s U s e r S e t t i n g s
Steam Re-
Heat
Pro
Bake Tru Convec
Push to Start/Enter E n t e r
User Settings
Light
Type gr/ga l ppm °dH °fH °eH
Soft 1 – 8 <20 – 150 1 – 8 1 – 15 1 – 11
Medium 9 – 20 160 – 350 9 – 20 16 – 35 12 – 25
Hard 21 – 28 360 – 700 21 – 28 36 – 70 26 – 35
User Settings
Water Hardness