Vizio VM60P - Manual (Page 45)

VIZIO VM60P HDTV User Manual
Version 3/26/2007 45
www.VIZIO.com
4.2.4
Saturation
Press the or button to highlight Saturation and then press the OK button to access this selection.
The menu page will disappear and be replaced by a smaller Saturation Indicator Bar so you can see the
color saturation level between the minimum (0) and maximum (100) levels. Use the button to reduce
the color and the button to increase the color. When finished, press the OK button to save and exit
this setting.
The Saturation adjusts the amount of color in the picture.
4.2.5
Hue
Press the or button to highlight Hue and then press the OK button to access this selection.
The menu page will disappear and be replaced by a smaller Hue Indicator Bar so you can see the hue
between from negative (-50) to positive (50). The default is 0. Use the button to change hue in the
negative direction and the button to change hue in the positive direction. When finished, press the OK
button to save and exit this setting.
Hue adjusts the tint of the picture. The easiest way to set tint is to look at flesh tones and adjust for a
realistic appearance. In most cases, the default middle position is correct. If people’s faces look too
orange try reducing the level of color first as the case of this is often too much color.
4.2.6
Sharpness
Press the or button to highlight Sharpness and then press the OK button to access this selection.
The menu page will disappear and be replaced by a smaller Sharpness Indicator Bar so you can see the
sharpness level between the minimum (0) and maximum (24) levels. Use the button to reduce the
sharpness and the button to increase the sharpness. When finished, press the OK button to save and
exit this setting.
The Sharpness adjusts the sharpness of the picture.
4.3
Video Settings for PC
4.3.1
Brightness
When the MENU button is pressed, the On Screen
Display (OSD) appears on the Video Settings
page. Press the button to highlight the
Brightness selection.
Press the OK button to access this selection.
The menu page will disappear and be replaced by
a smaller Brightness Indicator Bar so you can see
the brightness level between the min. (0) and max.
(100) levels. Press to reduce the brightness
and to increase the brightness. When finished,
press the OK button to save and exit this setting.
The Brightness adjusts the black levels in the picture. If the brightness is too low you will not be able to
see the detail in darker parts of the picture and if the brightness is too high the picture will look washed
out.