Vizio VM60P - Manual (Page 36)

VIZIO VM60P HDTV User Manual
Version 3/26/2007 36
www.VIZIO.com
3. If the or button is pressed first, then
the Range Mode is activated so that you
can specify a smaller range of channels to
be scanned again.
Press the button to highlight From
Channel and enter the channel using the
number buttons, then press the button
again to highlight To Channel and enter
the channel using the number buttons.
Press OK to start scanning.
Press EXIT to navigate away from this
screen.
Note: If the OK button is pressed, then the
automatic scanning will start again.
3.3.4
Adding or Deleting (Skipping) DTV Channels
To select a DTV channel to be skipped when ‘channel surfing’ with the CH + / - buttons, or to be added to
these feature, follow this procedure.
4. Follow the steps in Section 3.3.2 to
display the DTV Tuner Setup menu.
Press the button to highlight Channel
Skip. Press the OK button.
5. The list of channels available and stored
in memory is shown on the screen. If the
list is longer than 8 channels, as you
repeatedly press the button you will be
able to scroll through to see them all. The
boxes to the right of the channel names
are empty by default.