Vizio VM60P - Manual (Page 29)

VIZIO VM60P HDTV User Manual
Version 3/26/2007 29
www.VIZIO.com
2.7
Connecting a PC Computer
1. Turn off the power to the Plasma HDTV and PC Computer.
2. Connect a 15-pin D-Sub RGB (VGA) cable to the RGB output of your pc computer and the
other end to the RGB PC input (blue area) at the rear of the Plasma HDTV.
3. Connect the Audio Out on your pc computer to the RGB PC Audio input (purple area) at the
rear of the Plasma HDTV.
4. Turn on the power to the Plasma HDTV and PC Computer.
5. Select RGB using the INPUT button on the remote or
side of the Plasma HDTV, or directly by pressing the
RGB button on the Remote Control.
Note:
a) For the best picture quality when connecting a pc computer through RGB PC, set your pc
computer timing mode to VESA 1024x768 at 60Hz. Please refer to the pc or graphic
card’s user guide for additional information on how to set the timing mode.
b) Refer to your pc computer user manual for more information about the video output
requirements of the product.
c) A RGB (VGA) cable and stereo mini jack cable are not included and can be purchased at
an electronics store.